1 Timely cleaning
In case of heavy rain, it should be cleaned in time.
2 Lacquered
The acidic components in the rainwater have a strong corrosive effect on the painted surface of the excavator, which will cause damage to the painted surface of the excavator over time. Therefore, in the rainy season, it is best to paint the face of the excavator. The simplest is waxing, and the longer and more effective is to seal the glaze. Either way, put an invisible protective coat on the excavator to prevent the paint from fading and aging.
3 Chassis care
The chassis is the part closest to the ground, which is particularly affected by road conditions. Generally, this part is most susceptible to rusting, and the wheel housing may even be loose and perforated. Therefore, we must pay attention to the clean antirust treatment of the chassis of the excavator, and do the antirust treatment of the chassis once.
4 Ignition start
On a rainy day, if you encounter a problem that the engine is not easy to start, sometimes even if you start it barely, it is weak. The most likely cause of this problem is the leakage from the ignition system due to humidity, which has lost its normal ignition function.
If it is found that the ignition system is poor due to damp ignition and the engine performance is reduced, it is best to use a dry paper towel or a dry cloth to wipe the inside and outside of the distribution board and the wires, and then spray the desiccant with a special desiccant spray tank. In the distribution panel cover, battery connector, line connector, high-voltage line, etc., the engine can be started after a while.
