Small loaders are one of the common construction machinery in production and daily life. When choosing a small loader, it is important to first look at the engine. Single cylinder engines are connected by belts, which can cause some inconvenience in starting and using clutches in old cars.
Especially when the clutch is prone to problems, it is recommended to choose a pressure plate clutch. In this case, the engine can only choose a dual cylinder or higher gearbox. Generally, the gearbox is mechanical with a high bottom speed, and there is no need to consider the overall structure of the vehicle. It looks sturdy and can be used economically in terms of the new car price, user comfort, and future maintenance costs. For fully hydraulic engines, although they are easy to use, the maintenance costs in the future are very high.
It is relatively difficult to use vehicles in winter, and it is recommended that the vehicle not be started for more than 8 seconds at a time. The interval between each startup should be around one minute. After starting, wait for the engine to idle for about 3 minutes, firstly to charge the battery. The second is to achieve a water temperature of 55 degrees Celsius and an air pressure of 0.4 MPa. Full load operation is only allowed when the water temperature of the diesel engine is above 55 degrees Celsius and the oil temperature is above 45 degrees Celsius.
